Water leak Waterproofing is one of the innovative methods for dealing with the so-called water leakage that occurs as a result of the explosion or damage of water pipes placed inside the various real estate, whether in residential buildings, hotels or hospitals.
It is very important to treat water leakage because it causes weakening and crumbling of concrete, which leads to its collapse or corrosion of iron or any metal structure. And smearing the paint and coating the interior walls, and after identifying the negative aspects of water leakage, we will find that the most places that suffer from this problem are the bathrooms.
Ways to isolate bathrooms The bathroom is always characterized by high humidity as a result of using water in the bathroom; When taking a hot shower, a lot of water vapor is formed that condenses and falls on the walls and floors of the bathroom, and over time a crack will appear in the bathroom floor as well as the walls.
Plaster or cement screed Insulation is considered effective when it is done in the first stage of construction, and for this reason, before laying water pipes in the bathroom floor, it is preferable to put a layer of cement mortar mixed with Silica Flex, and the thickness of this layer is usually thirty centimeters, and it is a suitable method for isolating the floors of swimming pools. Polypropylene is a plastic material that does not collect impurities.
After the insulation process, the pipes are installed and the plumbing works are completed, then ceramic tiles are laid, and a bathtub or a lightweight bathtub, which is available in different shapes and types, is chosen. It is most effective to insulate the bathroom in this way before installing the plumbing.
Bitumen insulation Handcrafted from drip burlap. That is, the floors are covered with pieces of burlap that acts as a principle of rock wool, and after distributing it in several layers, liquid bitumen or black slate (asphalt) is melted and poured over the burlap, which is a traditional method used today in insulation.
plaque flakes The other way is to buy ready-made plaque chips, i.e. distilled burlap, without having to follow the traditional method of preparing them, which is called the Ansam method; So that these slices are placed and glued to the ground after being heated with fire, which is an effective way to prevent leakage and requires experience in its installation.
Let's start with the basics. Corded products are designed to be used with a power source, typically an electrical outlet. This means that they are not inherently waterproof or weather-resistant. Water and electricity do not mix well, and using corded products in wet conditions can result in electric shocks, damage to the equipment, and even fires. check my site
Nemůžete odesílat nové téma do tohoto fóra. Nemůžete odpovídat na témata v tomto fóru. Nemůžete upravovat své příspěvky v tomto fóru. Nemůžete mazat své příspěvky v tomto fóru. Nemůžete hlasovat v tomto fóru.
FAQ
Hledat
Seznam uživatelů
Uživatelské skupiny
Registrace
Osobní nastavení
Přihlásit se pro kontrolu soukromých zpráv
Přihlášení
