Fórum - Zobrazit téma - Sunshine carbon arc aging machine (domestic) sealing problem - www.WMHelp.cz
forum.WMHelp.cz
O všem, co souvisí s Windows Mobile
 
 FAQFAQ   HledatHledat   Seznam uživatelůSeznam uživatelů   Uživatelské skupinyUživatelské skupiny  RegistraceRegistrace 
 Osobní nastaveníOsobní nastavení   Přihlásit se pro kontrolu soukromých zprávPřihlásit se pro kontrolu soukromých zpráv   PřihlášeníPřihlášení 

Sunshine carbon arc aging machine (domestic) sealing problem

 
Přidat nové téma   Zaslat odpověď    Obsah fóra WMHelp.cz -> Palm
Zobrazit předchozí téma :: Zobrazit následující téma  
Autor Zpráva
yanyan1
nováček
nováček


Registrace: 24.2. 2021
Příspěvky: 9

PříspěvekZaslal: út 19. říjen, 2021 7:55    Předmět: Sunshine carbon arc aging machine (domestic) sealing problem Citovat

Sunshine carbon arc aging machine (domestic) sealing problems

Sunshine carbon arc aging machine (is the product to be tested in a closed pressurized test, through heating, so that the water between the test chamber compartment boiling and steam, to be water steam sharply to drive out the cold air in the pot from the exhaust valve, and then close the exhaust valve, continue to heat, at this time, because the steam can not overflow, so that the boiling point increases, get higher than 100 ℃ temperature, so as to get a saturation of steam pressure.

Exploring the sealing problem of sunlight carbon arc aging machine.

In high temperature conditions, such as doing 135 ℃ end high temperature situation, the pressure difference between inside and outside the test chamber increases sharply, this time to test the test chamber body sealing do how? If the seal is not good, there will be serious air leakage, that the test chamber will not get a saturation of the vapor pressure, so as not to achieve the test conditions. This shows that the PCT high-pressure accelerated test chamber sealing has become a key issue. Sealing problems arise, some are design problems, some are maintenance problems. Therefore, we should strictly follow the equipment maintenance manual in the use of equipment for regular maintenance to ensure that the normal operation of equipment, technical parameters do not deviate.

Sunshine carbon arc aging machine (mainly used for solar photovoltaic materials, circuit boards, semiconductors, communications equipment, magnetic materials and other industry products of high humidity, high temperature, high pressure performance, can accelerate the exposure of products in the development or production of bad or defective.

UV Aging Test Chamber Structural Characteristics

ozone aging test chamber structure and application

G505-filter Medium Tester
Návrat nahoru
Zobrazit informace o uživateli Odeslat soukromou zprávu
Zobrazit příspěvky z předchozích:   
Přidat nové téma   Zaslat odpověď    Obsah fóra WMHelp.cz -> Palm Časy uváděny v GMT + 1 hodina
Strana 1 z 1

 
Přejít na:  
Nemůžete odesílat nové téma do tohoto fóra.
Nemůžete odpovídat na témata v tomto fóru.
Nemůžete upravovat své příspěvky v tomto fóru.
Nemůžete mazat své příspěvky v tomto fóru.
Nemůžete hlasovat v tomto fóru.


Powered by phpBB © 2001, 2005 phpBB Group

Reklama / Ceník
Vstup pro inzerenty




Webmaster | Hledání | Statistiky | Syndikační kanály WMHelp.cz, informace ze světa Windows Mobile, asistenční služby. ISSN 1802-5684
RSS News | RSS Downloads | Atom News | Atom Downloads | Plucker Text | Plucker Color | Plucker Gray | PDA verze | Právní ujednání | Ochrana osobních údajů